新闻动态
新闻中心
吴志刚在International Journal of Thermal Science 发表论文
2008-05-27
博士生吴志刚在International Journal of Thermal Science 上发表论文“Zhigang Wu, Guoliang Ding, Kaijian Wang, Masaharu Fukaya. Application of a genetic algorithm to optimize the refrigerant circuit of fin-and-tube heat exchangers for maximum heat transfer or shortest tube. International Journal of Thermal Sciences, 2008, 47: 985–997”。
该论文的摘要与关键词如下:
Abstract: Optimization of the refrigerant circuit (RC) of a fin-and-tube heat exchanger can increase its heat exchange capacity or decrease its cost. The genetic algorithm is one of the suitable optimization methods, however it needs to be improved for RC optimization of fin-and-tube heat exchangers. An improved genetic algorithm (IGA) is proposed for RC optimization. In the IGA, the RC solutions are represented by one-dimensional integer strings which can save both computer memory and decoding time. RC correction operators are developed and embedded in the entire genetic process with the goal of avoiding physically impossible solutions. The knowledge-based RC generation method, greedy RC crossover method, greedy RC mutation method and all-previous-population based selection method are developed in order to improve the efficiency of the genetic evolution process for RC optimization. Case studies with 3 different heat exchangers show that both the optimization speed and the quality of the output optimal solution of IGA are better than those of the conventional genetic algorithm. A 0–40% decrease in total length of joint tubes is obtained after optimization with the IGA with the target of obtaining the shortest joint tubes. In addition, a 2.8–7.4% increase in heat exchange capacity is obtained after IGA optimization with the target of maximum heat transfer.
Keywords: Fin-and-tube; Heat exchanger; Refrigerant circuit; Optimization; Genetic algorithm
这是我室今年在国际学术期刊上发表的第5篇论文,其余4篇为:
1)Haitao Hu, Guoliang Ding, Wenjian Wei, Zhence Wang, Kaijian Wang. Heat transfer characteristics of R410A-oil mixture flow boiling inside a 7 mm straight smooth tube. Experimental Thermal and Fluid Science, 2008, 32 (3): 857–869
2)Zhigang Wu, Guoliang Ding, Kaijian Wang, Masaharu Fukaya. An extension of a steady-state model for fin-and-tube heat exchangers to include those using capillary tubes for flow control. HVAC&R Research, 2008, 14 (1): 85-101
3)Ke-zhi Yu, Guo-liang Ding, Tian-ji Chen. Modified two-fluid model for air curtains in open vertical display cabinets. International Journal of Refrigeration, 2008, 31 (3): 472 – 482
4) Hai-tao Hu, Guo-liang Ding, Kai-jian Wang. Measurement and correlation of frictional two-phase pressure drop of R410A/POE oil mixture flow boiling in a 7 mm straight micro-fin tube. Applied Thermal Engineering, 2008, 28 (11-12): 1272-1283